How to Use K-Seal®

For cooling systems up to 20 litres capacity, permanently seal head gasket, block, radiator and water pump leaks.

Find a Stockist
K-Seal

Instructions

1. Shake the bottle vigorously and add the entire contents to the radiator or header/expansion tank

If adding to the radiator do not pour directly onto the radiator core. K-Seal products are compatible with all types of antifreeze/coolant and are not affected by other additives that may already be in the cooling system.

It does not matter if you add K-Seal products to a cold or hot engine, but take care when working with a hot engine.

For very small cooling systems (e.g. motorbikes), it is possible to add just part of the bottle but you must make sure that the contents are extremely well mixed first.

2. Run the engine up to operating temperature

The quickest way is to take the vehicle for a gentle drive – otherwise, leave the
engine idling until the temperature gauge reaches the normal level.

3. Either replace the cooling system contents or leave K-Seal in the system

After K-Seal has made a repair it is not necessary to leave it in the system because the repair is permanent. You can either choose to replace the contents of the cooling system or leave the original K-Seal product in the system.

Important Please use extreme caution when working on a hot cooling system as hot coolant and gases could cause injury. If in doubt please consult a qualified mechanic.

Watch the video on how to use K-Seal

Expert Advice

Head Gasket Failure? Cracked Head or Block?
Leaking Radiator?

Expert Advice

Where to buy K-Seal

Have any of these symptoms? K-Seal could save you thousands on a workshop repair. Search for a stockist today!