Repairing car radiator leaks with a radiator stop leak

K-Seal will permanently fix most car radiator leaks with ease – saving you time and money taking your vehicle to a mechanic.

Where to Buy K-Seal

What is a car radiator?

The main function of a car’s radiator is to cool the internal combustion engine that powers the vehicle – not to heat it up!

A car radiator highlighted in an exploded diagram of a car engine.
A car radiator is usually located at the front of a car’s engine.

The radiator is designed to remove the heat generated by the engine to the air in order to regulate the engine temperature and prevent overheating. If the engine overheats then it will stop working and have to be replaced – which can be costly!

That’s why it’s critical to understand how your car radiator works so you can identify any common radiator leak symptoms, fast.

How does a car radiator work?

An engine needs to burn fuel to run, a process which naturally produces an immense amount of heat. The engine therefore needs to be cooled as much as possible so that the pistons do not break down and destroy the entire system.

This is where the radiator, which is part of the engine’s cooling system, comes in.

K-Seal will permanently car radiator leaks
A car radiator.

How your car radiator cools the engine

  1. The coolant in an engine is passed through tubes inside the radiator, where heat it has absorbed from the engine is dissipated into the atmosphere, before the coolant returns to the engine. This is why it’s also important to keep an eye on your coolant temperature level.
  2. Coolant enters the pipes in an overheated state, causing it to become highly pressurised (aided by turbulence inside the radiator pipes).
  3. This causes the radiator cap to open at a predetermined pressure point.
  4. The heat is released, allowing any excess coolant to escape into an overflow tank attached to the side of the radiator.
  5. That coolant is then returned to the radiator when its temperature has sufficiently lowered.

Radiator and cooling systems vary slightly from model to model (especially in older cars versus newer models), but this is the process that the majority of systems employ.

Why do car radiators fail?

The main reason for radiator failure is a coolant leak, which can lead to the cooling system failing.

If the coolant has not been checked or topped up properly, the radiator, hoses and hose connections will become clogged and begin to rust. Over time, such corrosion will cause small holes or ‘pinhole leaks’ to develop in the car radiator. This will result in engine coolant loss, and a need for car radiator repair – or even the complete replacement of your radiator.

How to repair radiator leaks

If you’ve identified a common symptom of a leaking radiator, act quickly to get it fixed. To start with, you need the best radiator stop leak you can get your hands on.

Find your local supplier and grab yourself a bottle of K-Seal. A highly reliable radiator stop leak, K-Seal will permanently repair and fix most leaks in the radiator or radiator casing – putting a stop to those troublesome pinhole leaks in your car radiator.

How to use radiator stop leak

Using K-Seal as a radiator stop leak is simple:

  1. Shake the bottle.
  2. Put radiator stop leak in the coolant reservoir or radiator.
  3. Run the engine up to operating temperature.

The liquid formula will make its way around the engine and fill any pinhole leaks, holes and cracks in your radiator or cooling system to fix it, permanently. And thanks to its scientifically tested formula, there is no risk that this radiator stop leak will cause overheating.

Why you should choose K-Seal to fix your leaking car radiator

Although the radiator may be one of the cheaper components in the car engine, it can still cost hundreds to have it repaired or replaced.

Scientifically tested, K-Seal, K-Seal HD and K-Seal Ultimate are the #1 head gasket sealer and radiator stop leak – capable of

  • sealing holes up to 0.635mm in diameter
  • sealing slots or crack up to 0.254mm wide by 12.7mm long

Just one bottle of K-Seal could save you a lot of money by fixing an engine coolant leak instead of you having to replace the parts.

Grab a bottle of K-Seal today

Could other parts of my engine be affected?

Although your radiator could be the source of your engine troubles, it might not be the only part of your engine you need to take a look at.

Select an engine part in the interactive diagram below to explore your engine and the important components that keep everything ticking over.

Click on the engine components below for details
More Info »

Still not sure what the problem is? Try our 60 second problem solver to quickly identify what the issue is based on your symptoms.

K-Seal is the #1 stop leak solution for car radiator leaks

Expert Advice

Head Gasket Failure? Cracked Head or Block?
Leaking Radiator?

Expert Advice

Where to buy K-Seal

Have any of these symptoms? K-Seal could save you thousands on a workshop repair. Search for a stockist today!

Find a stockist